Specifications |
| 127 |
| ||
Dimensions |
|
|
Figure 35 • Universal Roll Holder Arm |
|
Spacer | M2.5 × 6 |
| |
| M4 × 5 |
Roll support
Holder arm
M6 × 10
1.Determine the media roll size and then select the appropiate mounting holes in the roll holder arm.
2.See Figure 36. Install the positioning screw into the desired positioning hole until it extends at least 1 mm out the other side.
09/14/2009 | TTP 2000 Technical Manual |