16Installation

Installing a Paper Guide

Installing a Paper Guide

The TTP 2000 printers require a paper guide for proper operation. This paper guide allows the printer to be configured for use with 58, 60, 80, or 82.5 mm width media. The printer senses which paper guide is fitted and adjusts to it automatically. The TTP 2000 printers are delivered without paper guide fitted.

1.Select the paper guide you want to install.

Note • Evaluation kits contain all sizes of paper guide that are available. For regular volume deliveries, the appropriate guide must be ordered separately. The printer will not operate properly without a guide.

2.Open the print head by pushing green print head lock plate towards the rear of the printer and lifting up the print head, see Figure 22, Opening the Print head, on page 32.

3.Loosen the screw on the backplate of the printer. Insert the T-shaped tab of the printer guide into the T-hole and fasten the screw.

4.Close the print head.

Figure 4 • Fitting a Paper Guide

“T”-hole

Paper

Guide

Width

Screw

in mm

M2.5 x 6

P1002902-002

TTP 2000 Technical Manual

09/14/2009