Reference [Effects]

2. Use the PATCH SELECT [Q]/[W] keys or the dial toselect the new patch.

As you turn the dial, new patches will be recalled immediately. If the track mixer REVERB SEND and CHORUS/DELAY SEND parameter settings are raised, you can press the PLAY [R] key to play back the song, and listen to the result of the newly selected patch.

HINT

•For details on track mixer operations, refer to p. 71.

•The lit/out status of the [REVERB] or [CHORUS/DELAY] key shows the on/off status of that module. Each push of the key toggles the status.

3. To return to the main screen, press the [EXIT] key.

Editing a send/return effect patch

This section explains how to edit a send/return effect patch.

1. Press the [REVERB] key or [CHORUS/DELAY] key in the effect section.2. If necessary, turn the dial to select the patch that

you want to edit. The following screen is an example of the display indication when the [CHORUS/DELAY] key was pressed.

SEND CHODeepCho 7

3. Press the [EDIT] key.

The display will indicate “EDIT”, and a screen will appear in which you can edit the patch. When the [EDIT] key is pressed, the effect type selected for that send/return effect is shown.

TYPE

CHORUS

Effect type

4. If you want to change the effect type, turn the dial.

When the effect type is changed, the effect parameters will

also change accordingly.

TYPE

DELAY

HINT

If the contents of a patch have been edited, the “EDIT”

indicator in the upper part of the display will change to

“EDITED”.

5. Use the cursor up/down keys to select the effect

parameter that you want to edit.

The first line of the display shows the effect type, and the second line the effect parameter name.

The current setting is shown to the right of the parameter name.

DELAY

TIME 370

Effect parameter Setting value

6. Turn the dial to change the setting.

For details on the effect types that can be selected for reverb or chorus/delay, and on the range of each effect parameter, refer to the appendix (→ p. 145 – 153) at the end of this manual.

7. Repeat steps 5 - 6 as necessary to edit other effect parameters.8. When you have finished editing, press the [EXIT] key.

The unit returns to the patch select screen.

NOTE

Keep in mind that if you select another patch without first storing the patch, the edited contents will be lost. If you want to keep the results of your editing session, refer to the following section.

ZOOM MRS-802

108