Zoom MRS-802 ●ZNR module, ■LINE algorithm, ●VOL PDL module, ●COMP/LIM module, ●ISOLATOR module, ●3 BAND EQ module, ●MODULATION/DELAY module

Appendix

■LINE algorithm

●COMP/LIM module

For an explanation of types and parameters, see the MIC algorithm.

●ISOLATOR module

Type			Parameter
ISOLATOR	XOVER_Lo	XOVER_Hi	MIX_HIGH	MIX_MID	MIX_LOW
	An effect that divides the signal into three frequency bands, and lets you specify the mix amount.

Parameter Description

Parameter Name	Setting Range	Parameter Description
XOVER_Lo	50 – 16000	Adjusts the frequency for bass/midrange division.
XOVER_Hi	50 – 16000	Adjusts the frequency for midrange/treble division.
MIX_HIGH	OFF, -24 – 6	Adjusts the treble mix amount.
MIX_MID	OFF, -24 – 6	Adjusts the midrange mix amount.
MIX_LOW	OFF, -24 – 6	Adjusts the bass mix amount.

●3 BAND EQ module

For an explanation of types and parameters, see the CLEAN, DIST, ACO/BASS SIM, BASS algorithm.

●ZNR module

For an explanation of types and parameters, see the CLEAN, DIST, ACO/BASS SIM, BASS algorithm.

●VOL PDL module

For an explanation of types and parameters, see the CLEAN, DIST, ACO/BASS SIM, BASS algorithm.

●MODULATION/DELAY module

Type		Parameter
CHORUS	DEPTH	RATE	MIX
	Stereo chorus with clear sound and great spaciousness.
FLANGER	DEPTH	RATE	FB
	An effect that adds a pronounced character and modulation to the sound.
PHASER	RATE	COLOR
	An effect that adds a swooshing modulation to the sound.
TREMOLO	DEPTH	RATE	CLIP
	An effect that cyclically varies the volume.
PITCH	SHIFT	TONE	BALANCE
	An effect that modifies the pitch of the direct sound.
RingMod	RATE	BALANCE
	An effect that produces a metallic resonance.
DOUBLE	TIME	TONE	MIX
	A doubling effect that allows the delay time to be set in 1-ms steps up to 100 ms.

Parameter Description

Parameter Name	Setting Range	Parameter Description
DEPTH	0 – 10	Adjusts the depth of the effect.
RATE	1 – 30	Adjusts the speed of the effect.
MIX	0 – 30	Adjusts the mix amount of the effect sound.
FB	TYPE = FLANGER : -10 – 10	Adjusts the feedback amount.
	TYPE = DELAY : 0 – 10
COLOR	1 – 4	Specifies the type of phase tone.
CLIP	0 – 10	Emphasizes the effect.
SHIFT	-12.0 – 24.0	Adjusts the amount of pitch shift produced by the pitch shifter. 1.0 corresponds
		to a semitone.
TONE	0 – 10	Adjusts the tone.
BALANCE	0 – 30	Adjusts the balance between the direct sound and effect sound.
SIZE	1 – 10	Adjusts the spatial width.
TIME	1 – 100	Adjusts the delay time (x 1 ms).

ZOOM MRS-802

151