Zoom MRS-802 [P] key, press the PLAY [R] key, 4. When you have ﬁnished recording, press the STOP, 7. Press status key 1 until the key is lit in green

Quick Tour

When a recording track has not been selected

MASTER

Track 1

Track 2

When a recording track (track 1) has been selected

1 MASTER

Track 1

Track 2

4. When you have ﬁnished recording, press the STOP[P] key.

The REC [O] key and PLAY [R] key will go out, and recording will stop. The indication “wait...” is brieﬂy shown on the display, and then the main screen returns.

NOTE

The duration of the “wait...” period may differ depending on the recording cordition. Never turn power to the unit off while “wait...” is being shown on the display. Otherwise recorded data may be lost and damage to the unit may occur.

HINT

You can select up to two tracks simultaneously for recording.

(Allowable track pairs are 1/2, 3/4, 5/6, and 7/8.)

2. Set fader 1 and the [MASTER] fader to 0 dB. Then adjust the volume of the monitor system while playing your instrument.

5. To listen to the recorded content, press the ZERO

[U] key to return to the beginning of the song, and

press the PLAY [R] key.

The track will be played back together with the rhythm

section.

HINT

3. To begin recording, press the ZERO [U] key to return to the beginning of the song. Then hold down the REC [O] key and press the PLAY [R] key.

The REC [O] key and PLAY [R] key will light, and recording will begin. Record your instrument playing while listening to the rhythm section.

The recording level can be checked with the IN1/IN2 level meter in the lower left of the display and the [CLIP] indicator of the [REC LEVEL] control.

The REW [T] key and FF [Y] key only operate when the

recorder is in the stop mode.

6. To stop playback, press the STOP [P] key. If you want to re-do the recording, repeat steps 3 and 4.

7. Press status key 1 until the key is lit in green.

The recording standby condition of track 1 is canceled.

HINT

•Recorded content can be copied, deleted, or edited as an entire track or by specifying a range (→ p. 46).

•By using switching the V-take for the track, you can record a new take while preserving the current take (→ p. 33).

Basic operation of transport keys

REW [T] key

Moves the current position back in 1-second steps.

Movement speed can be increased by holding down the

REW [T] key and pressing the FF [Y] key.

FF [Y] key

Moves the current position forward in 1-second steps. Movement speed can be increased by holding down the FF [Y] key and pressing the REW [T] key.

ZERO [U] key

Returns the recorder to the start position (counter zero position).

STOP [P] key	PLAY [R] key
Stops the recorder.	Starts playback from the current position.

REC [O] key

When this key is held down while pressing the PLAY [R] key, the recorder starts to record. Pressing this key during playback causes punch- in, and pressing the key during recording causes punch-out.

ZOOM MRS-802