Zoom MRS-802 Applying the insert effect only to the monitor signal, WET, UTILITY, TR EDIT, REC SRC, • WET, • DRY, the control section twice

Reference [Effects]

7. To confirm the new name, press the [STORE] key in

the control section twice.

The new name is stored, and the unit returns to the patch

selection screen.

NOTE

Keep in mind that the name will revert to the previous setting if you switch to another patch without storing the edited patch name.

Applying the insert effect only to the monitor signal

Normally when the insert effect is placed into the input mixer, the signal processed by the effect will be recorded on the track. If necessary, however, you can apply the insert effect only to the monitor signal, and record the unprocessed input signal on the track. For example when recording the unprocessed sound of a vocal performance, the vocalist may be more comfortable singing if an insert effect suitable for mic recording is applied to the monitor signal.

INPUT

Insert effect

Recorder

1. Set the insert effect point to the input mixer.

2. Press the [UTILITY] key in the display section.

The utility menu appears.

UTILITY

TR EDIT

3. Use the cursor left/right keys to call up the indication “UTILITY REC SRC”, and press the [ENTER] key.

The display changes as follows.

In this condition, you can select one of the following two signal types to be recorded on the track.

REC SRC

WET• WET

The input signal that has passed through the insert effect will be recorded on the track (default setting).

• DRY

Only the unprocessed input signal will be recorded on the track. Even in this case, however, the insert effect will be applied to the monitor signal.

ZOOM MRS-802

106