Reference [Recorder]

forward or backward in milliseconds or ticks.

5. If you want to use the preview function to hear the region before the current location, press the REW [T] key. To hear the region after the current location, press the FF [Y] key.

If you press the REW [T] key, a region of 0.7 seconds prior to the current location will play (ending at the current location). If you press the FF [Y] key, a region of 0.7 seconds following the current location will play (beginning at the current location). This is called “preview playback”. When preview playback ends, scrub playback will resume.

6. To cancel the scrub function, press the STOP [P]

key.

The unit returns to the main screen.

Changing the settings of the scrub function

When the scrub function is on, you can change the direction of the scrub playback (whether it will play the region before or after the current location), and the length of the scrub playback region.

1. From the main screen, hold down the STOP [P]

key and press the PLAY [R] key.

This turns the scrub function on, and the following screen will appear. The characters in the lower left (TO/FRM) indicate the direction of scrub playback, and the number in the lower right (40 - 200) is the length of scrub playback.

SCRUB 04

FRM 40ms

2. If you want to change the length of scrub playback, use the cursor left/right keys to cause the scrub playback length setting to flash, and turn the dial.

You can select 40, 80, 120, 160, or 200 (ms) as the length of

scrub playback.

HINT

You can also use the cursor up/down keys to change the

scrub playback length.

ZOOM MRS-802

3. If you want to change the direction of scrub playback, use the cursor left/right keys to cause the scrub playback direction indication to flash, and turn the dial.

If you select “TO”, scrub playback will begin from an earlier point and end at the current location. If you select “FRM”, scrub playback will begin from the current location (this is the default setting).

TO

FRM (Default setting)

 

 

 

Current location

Current location

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Scrub playback

 

 

 

 

Scrub playback

 

 

 

 

 

 

 

 

 

 

 

 

HINT

Any change you make to the scrub settings will take effect

immediately.

4. If you want to use the new scrub playback settings to find a location, use the cursor left/right keys to move the flashing area to the unit displayed at the right of the counter (“MS” for time display, or “TICK” for measure display).

5. Turn the dial to the left or right to move the current location.

During scrub playback, the current location can be moved

forward or backward in milliseconds or ticks.

6. To exit the scrub function, press the STOP [P] key.

The unit returns to the main screen.

45