Reference [Recorder]

2. Use the cursor up/down keys to bring the indication “TR XX-XX” onto the display (where X is the track number and V-take number).

TR 2- 1

GTR 2- 1

3. Press the [MASTER] status key to select the master track.

The number and name of the V-take currently selected for the master track appear on the display. (If nothing is recorded on the V-take, the indication shows “NO DATA”.)

TR M- 1NO DATA

HINT

Instead of pressing the [MASTER] status key, you can also

use the cursor left/right keys to select the master track.

4. If you want to change the V-take, turn the dial.5. When the V-take has been selected, press the [EXIT] key.

The [TRACK PARAMETER] key goes out, and the unit

returns to the main screen.

6. From the main screen, press the [MASTER] statuskey several times, until the key is lit in red.

The master track is now ready for recording.

While the key is lit in red, the other tracks as well as the drum track and effects operate normally.

HINT

The signal recorded on the master track is the signal coming from the [MASTER] fader. This is the same signal that is supplied at the OUTPUT jacks.

7. Set the recorder to playback and adjust the mixing

balance of the various tracks.

The individual track level settings as well as the insert effect and send/return effect settings all have an influence on the signal that is sent to the master track. Adjust levels while watching the L/R level meter, and make sure that no signal clipping occurs.

8. To carry out the mixdown operation, press the ZERO [U] key to return to the beginning of the song, and then press the PLAY [R] key while holding down the REC [O] key.

Recording on the master track starts.

9. When recording is complete, press the STOP [P] key.Playing the master track

To play the recorded master track, proceed as follows.

1. From the main screen, press the [MASTER] statuskey several times, until the key is lit in green.

The unit goes into master track playback mode. In this mode, all other status keys are out, all other tracks are muted, and all effects are switched off.

Master track

HINT

While the [MASTER] status key is lit in green, the transport

keys except for the REC [O] key operate normally.

2. Press the ZERO [U] key to return to the beginningof the song, and then press the PLAY [R] key.

Playback of the master track starts from the beginning. You

can use the [MASTER] fader to adjust the playback volume.

ZOOM MRS-802

38