Zoom MRS-802 MUTE, CURRENT, RECTRACK, REC TAKE, • 1, • MUTE, • PLAY, • CURRENT, and press the [ENTER] key, Executing bounce recording

Reference [Recorder]

internal setting so that the recording track(s) will also play

back.

1. From the main screen, press the [UTILITY] key.

The indication “UTILITY TR EDIT” appears on the display.

2. Use the cursor left/right keys to bring up the indication “UTILITY BOUNCE” on the display, and press the [ENTER] key.

3. Use the cursor left/right keys to bring up the indication “BOUNCE RECTRACK” on the display, and press the [ENTER] key.

RECTRACKMUTE• MUTE

The recording track(s) will be muted (default setting).

• PLAY

The recording track(s) will play back.

4. Turn the dial to change the setting to “PLAY”.5. To return to the main screen, press the [EXIT] key several times.■Selecting the recording destination V-take

In the default condition of the MRS-802, the result of the Bounce operation will be recorded on the V-take that is currently selected for the recording track(s).

If you want to play back a track while bouncing onto another V-take of that track, you can use the following procedure to change the recording destination V-take. (For information on V-takes, refer to page 33.)

1. From the main screen, press the [UTILITY] key.

The indication “UTILITY TR EDIT” appears on the display.

2. Use the cursor left/right keys to bring up the indication “UTILITY BOUNCE” on the display, and press the [ENTER] key.

3. Use the cursor left/right keys to bring up the

indication “BOUNCE REC TAKE” on the display,and press the [ENTER] key.

The V-take currently selected for recording is shown.

REC TAKECURRENT• CURRENT

The bounce result will be recorded on the V-take currently selected for the recording track.

• 1 - 10

The bounce result will be recorded on the V-take of the number you specify here.

4. Turn the dial to specify the recording destination V- take.

5. To return to the main screen, press the [EXIT] key several times.

Executing bounce recording

In this example, we will bounce the contents of tracks 1 - 6

onto V-take 10 of tracks 7/8.

1. Go to the UTILITY screen and verify that the BOUNCE RECTRACK parameter is set to “PLAY” .

2. Also on the UTILITY screen, verify that the RECTAKE parameter is set to “10” (V-take 10).

3. Press the status key 7 so that the keys is lit in red, and keep pressing the key.

4. While still holding down status key 7, repeatedly press status key 8 until both keys are lit in red.

The V-takes 10 of tracks 7/8 are now ready for stereo recording.

To monitor the two bounce target tracks in stereo, set the pan parameter for track 7 to L100 and the pan parameter for track 8 to R100.

ZOOM MRS-802

40