Zoom MRS-802 Combining multiple tracks on another track (Bounce function), How bounce works, recording track(s), Making bounce settings, ■ Specifying playback/mute for the

Reference [Recorder]

3. To stop playback, press the STOP [P] key.

4. To cancel the master track playback mode, press the [MASTER] status key so that the key goes out.

Muting of tracks 1 - 8 and the rhythm section is canceled, and the unit returns to normal operation. Status keys that were automatically turned off are returned to the previous condition.

Combining multiple tracks on another track (Bounce function)

How bounce works

“Bounce” is a function that mixes the performances of the recorder section and the drum track, and records them on one or two tracks. (This is sometimes called “ping-pong recording”.)

For example, you might bounce the contents of tracks 1 - 6 onto tracks 7/8 and then switch the V-takes of tracks 1 - 6 to record new versions of your performance.

HINT

• You can also mix the signals from the INPUT jacks into the bounce recording.

• If you select only one mono track as the bounce destination, the signal mixed to mono will be recorded.

• If necessary, you can play back all eight tracks, and bounce onto empty V-takes.

Making bounce settings

Before using the bounce function, you may have to make

certain settings.

■ Specifying playback/mute for therecording track(s)

In the default condition of the MRS-802, the bounce destination recording track(s) will be muted. If you want to play back a track while you bounce-record on another V- take of that track, use the following procedure to change the

ZOOM MRS-802

39