Zoom MRS-802 ● VOL PDL module, ●MODULATION/DELAY module

Appendix

● VOL PDL module

Type	Parameter
VOL PDL	MIN VOL
	You can use an expression pedal to control the volume.

Parameter Description

Parameter Name Setting Range Parameter Description

MIN VOL	0 – 10	When using an expression pedal as a volume pedal, this parameter specifies the
		minimum volume.

●MODULATION/DELAY module

Type			Parameter
CHORUS	DEPTH	RATE		MIX

Stereo chorus with clear sound and great spaciousness.

FLANGER	DEPTH	RATE	FB
	An effect that adds a pronounced character and modulation to the sound.
PHASER	POSITION	RATE	COLOR
	An effect that adds a swooshing modulation to the sound.
TREMOLO	DEPTH	RATE	CLIP
	An effect that cyclically varies the volume.
PDL-WAH	POSITION	FREQ	LEVEL	RTM
	An effect that lets you use an expression pedal to control wah manually.
AutoWah	FLT TYPE	POSITION	RESO	SENS
	An effect in which wah is applied according to your playing dynamics.
PITCH	SHIFT	TONE	BALANCE
	An effect that modifies the pitch of the direct sound.
RingMod	POSITION	RATE	BALANCE
	An effect that produces a metallic resonance.
EXCITER	FREQ	DEPTH	LowBoost
	An effect that gives the sound more focus and spatial definition.
AIR	SIZE	TONE	MIX
	Simulates the effect of air on the room resonance, giving the sound spatial depth.
WIDE	TIME	WET LVL	DRY LVL
	An effect that produces the sound of a stereo recording made with two mics.
DELAY	TIME	FB	MIX
	A delay effect with a maximum of 500 ms.

Parameter Description

Parameter Name	Setting Range	Parameter Description
DEPTH	0 – 10	Adjusts the depth of the effect.
RATE	1 – 30	Adjusts the speed of the effect.
MIX	0 – 30	Adjusts the mix amount of the effect.
FB	TYPE = FLANGER : -10 – 10	Adjusts the amount of feedback.
	TYPE = DELAY : 0 – 10
POSITION	AF / bF	Exchanges the effect locations of the PREAMP/DRIVE module and
		MODULATION/DELAY module.
COLOR	1 – 4	Specifies the type of phase tone.
CLIP	0 – 10	Emphasizes the effect.
FREQ	TYPE = PDL-WAH : 1 – 50	Adjusts the wah center frequency.
	TYPE = EXCITER : 1 – 5	Adjusts the frequency.
LEVEL	1 – 8
RTM	OFF / On	Adjusts the module output level.
FLT TYPE	bPF / LPF	Specifies whether the expression pedal will be used as a wah pedal.
RESO	1 – 10	Specifies the type of filter.
SENS	-10 – 10	Adds character to the sound.
SHIFT	-12.0 – 24.0	Adjusts the sensitivity with which the effect is applied.
TONE	0 – 10	Adjusts the amount of shift produced by the pitch shifter.
BALANCE	0 – 30	Adjusts the tone.
LowBoost	0 – 10	Adjusts the balance between the direct sound and effect sound.
SIZE	1 – 10	Emphasizes the low-frequency range.
TIME	TYPE = WIDE : 1 – 64	Adjusts the spatial width.
	TYPE = DELAY : 1 – 50	Adjusts the delay time.
WET LVL	0 – 30	Adjusts the mix amount of the effect sound.
DRY LVL	0 – 30	Adjusts the mix amount of the direct sound.

ZOOM MRS-802

147