Zoom MRS-802 Reference [Track Editing], Editing a range of data, TR 1, Copy, TR 8, TR 1/2, UTILITY, TR EDIT, TR EDIT, Copy Src, Copy Src, Copy Src

Reference [Track Editing]Reference [Track Editing]

This section explains how to edit audio data contained on the tracks of the recorder section. There are two major types of editing functions: specifying a range for editing, and editing an entire V-take.

Editing a range of data

The procedure for specifying a range of a V-take and then performing an action such as copying or moving is explained below.

Basic editing steps for range editing

When performing editing for a speciﬁed range of data, some

steps are similar for each action. These are as follows.

1. From the main screen, press the [UTILITY] key in

the display section.

The utility menu appears on the display.

• Fade I/O (Fade-in/out)

Perform fade-in/fade-out over a speciﬁed audio data

interval.

• Reverse

Reverse a speciﬁed range of audio data.

• TimStrch (Time Stretch/Compress)

Change the duration of a speciﬁed range of audio data on a track without changing the pitch.

4. Press the [ENTER] key.

The screen for selecting the track and V-take for editing appears.

The display shown below is an example for selecting the copy command in step 3.

UTILITY

TR EDIT

2. Verify that the indication “UTILITY TR EDIT” is on

the display, and press the [ENTER] key.

The track edit menu containing various editing commands

appears on the display.

Copy SrcTR 1- 1

Track number V-take number

5. Turn the dial to select the track number (1 - 8), and use the cursor up/down keys to select the V-take number (1 - 10).

TR EDIT

Copy

3. Use the cursor left/right keys to select the desired

command.

The following editing commands are available.

• Copy

Copy a speciﬁed range of audio data.

• Move

Move a speciﬁed range of audio data.

• Erase

Erase a speciﬁed range of audio data.

• Trim

Retain only a speciﬁed range of audio data and erase the rest.

Copy SrcTR 8- 1

On this screen, also V-takes that are not currently selected for tracks 1 - 8 can be selected for editing.

When track 8 is selected, turning the dial further to the right brings up the following screen.

Copy Src

TR 1/2

When this screen is shown, turning the dial to the right selects tracks in odd-numbered/even-numbered pairs (1/2, 3/4, 5/6, 7/8) or the master track. In this case, the currently selected V-take for the two tracks or the master track becomes the editing target.

6. Press the [ENTER] key.

ZOOM MRS-802