Reference [Phrase Looping]

NOTE

•To copy audio files to the internal hard disk, the option card UIB01/UIB-02 and a computer are necessary. For details, refer to the documentation of the UIB-01/UIB-02.

•Any sub folders in the WAV_AIFF folder are not recognized.

1. Refer to steps 1 - 6 of “Basic phrase loading steps”

to select “WAV/AIFF” as import source. Then press

the [ENTER] key.

The indication “IMPORT CD-ROM” appears on the display.

You can now select the source device.

IMPORT

CD-ROM

2. Use the cursor left/right keys to select the source device: “CD-ROM” (CD-R/RW drive) or “IntHDD” (internal hard disk).

3. Press the [ENTER] key.

The unit searches for WAV/AIFF files on the specified

device. When files are found, their names are listed on the

display.

IMPORT

LOOP1

HINT

When you select the CD-ROM as import source but no disc is inserted in the drive, the indication “IMPORT Ins Disc” appears on the display and the tray of the CD-R/RW drive opens. To continue the process, insert a disc containing audio files and then press the [ENTER] key.

4. Turn the dial to select the audio file to import.

When accessing a disc in the CD-R/RW drive which has audio files in a certain folder, select the folder name with the dial.

IMPORT

WAVFILES

When you press the [ENTER] key in this condition, the files inside the selected folder are displayed. Use the [EXIT] key to return to the next higher level.

5. To carry out the import process, press the [ENTER]

key.

Depending on the sampling frequency of the imported audio file, the following applies.

• Sampling frequency 44.1 kHz

When you press the [ENTER] key, the audio file is imported. When the process is complete, the phrase menu appears again.

• Sampling frequency other than 44.1 kHz

When you press the [ENTER] key, a selection screen for conversion to 44.1 kHz (resampling) appears.

WAV/AIFFResample ON

Turn the dial to select resampling on/off, and then press the [ENTER] key once more. When the import process is complete, the phrase menu appears again.

NOTE

Imported audio files are always played with a sampling frequency of 44.1 kHz. If resampling was disabled during import, a file with a different sampling frequency will play back with a different pitch.

Importing a phrase from a different project

You can import any phrase contained in the phrase pool of

another project stored on the hard disk.

HINT

When you import a phrase from the phrase pool of another project, you cannot specify a range. If necessary, edit the phrase playback point after importing the phrase (→ p. 61).

1. Refer to steps 1 - 6 of “Basic phrase loading steps” to select “PHRASE” as import source. Then press the [ENTER] key.

The indication “PRJ SEL xxxxx” (where xxxxx is the project name) appears on the display. You can now select the source project.

ZOOM MRS-802

60