Reference [Creating a CD]

5. Turn the dial to select the project, and press the

[ENTER] key.

This selects the project that will be backed up. The display now shows the space required for the backup in MB (megabytes).

PRJ SIZE 108MB

6. Press the [ENTER] key.

The name of the directory to be used for backup appears. A “directory” (also called “folder”) is a hierarchical unit that will be created on the backup media when the backup is executed. All data for one project are stored in the same directory.

When the backup is executed, a new directory is created on the CD-R/RW disc with the name “PROJxxx” (where xxx is the project number). This name can be edited if desired.

DirName

PROJ001

7. If you want to edit the backup destination directory name, use the cursor left/right keys to move the flashing position and turn the dial to select a character.

The following characters can be used.

Disc number

DISC001

BURNING

When backup is finished, the display shows “SAVE COMPLETE”.

If the project size is larger than the capacity of one CD-R/ RW disc, the disc will be ejected after it has been filled up, and the display changes as follows.

CHANGE

DISC002

10. When the above message appears, insert a newCD-R/RW disc, and press the [ENTER] key.

The backup operation resumes. If more than two discs are required, the above steps will be repeated. When backup is finished, the display indication changes to “SAVE COMPLETE”.

NOTE

When a backup spans several discs, the discs must be used in the same order for restore. Be sure to note the disc number on the case and label of the disc.

HINT

Numerals: 0 - 9

Letters: A - ZSymbols: _ (underscore)

When the disc has been ejected, it also is possible to abort the backup operation. To do this, press the [EXIT] key while the indication “CHANGE DISCxxx” (where xxx is the disc number) is shown. The indication will change to “SAVE CANCEL?”. Press the [ENTER] key to terminate the process.

8. Press the [ENTER] key.

The indication “SAVE SURE?” appears on the display.

HINT

11. To return to the main screen, press the [EXIT] key

several times.

If you press the [EXIT] key at any point during steps 4 - 7, you

can return to the previous step.

9. To execute the backup, press the [ENTER] key. Tocancel, press the [EXIT] key instead.

When backup starts, the disc number and the indication

“BURNING” appear on the display.

ZOOM MRS-802

120