Reference [Track Editing]

Copy Dst 00

TO

0 0 0 0 001 1 0

7. Specify the copy destination start point in the same

way as for the copy source, and press the [ENTER]

key.

The indication “Copy SURE?” appears on the display.

8. To execute the copy operation, press the [ENTER]

key.

By pressing the [EXIT] key instead of the [ENTER] key, you can return to the previous screens. When the copy is executed, the indication “Copy COMPLETE” appears on the display, and the unit returns to the track edit menu.

HINT

To paste the same range repeatedly, use the phrase loop function (→ p. 57).

2. Use the cursor left/right keys to move the flashing section of the counter, and turn the dial to specify the move start point.

You can also specify the point as a mark.

3. Press the [ENTER] key.

The display changes to “Move Src END”.

Move Src 00

END

0 3 1200 083 412

4. Use the same procedure as in step 2 to specify the move range end point.

If you press the PLAY [R] key at this point, the specified

range will be played.

5. Press the [ENTER] key.

The display changes to let you specify the move destination

track/V-take.

Moving a specified range of data

You can move the audio data of a specified range to a specified position on a specified track. This action will overwrite the existing data at the destination location. The move source data will be erased.

Move source track

Move

Move destination track

1. Refer to steps 1 - 6 of “Basic editing steps” to

select the move source track/V-take, and press the

[ENTER] key.

The display changes as follows. This screen lets you specify

the move range start point.

Move Src 00

START

0 0 0 0 001 1 0

Move Dst

TR 1- 1

NOTE

•If you have selected a single track as move source, only a single track can be selected as move destination.

•If you have selected two adjacent tracks or the master track as move source, only two adjacent tracks or the master track can be selected as move destination. In this case, the currently selected V-take for each track becomes the editing target.

6. Specify the move destination track/V-take in the same way as when selecting the move source track/V-take, and press the [ENTER] key.

The display changes to the screen for specifying the move

destination start point.

Move Src 00

TO

0 0 0 0 001 1 0

7. Specify the move destination start point in thesame way as for the move source, and press the

[ENTER] key.

ZOOM MRS-802

48