Zoom MRS-802 Reference [Recorder], Using V-takes, TR 1, TR 3, GTR 1, GTR 3, • GTRxx-yy, Switching V-takes, Editing V-takenames, 4. Turn the dial to select the V-take

Reference [Recorder]

Reference [Recorder]

Using V-takes

Each track 1 - 8 of the recorder contains ten virtual tracks, called “V-takes”. For each track, you can select one take, which will be used for recording and playback. For example, you can switch V-takes as you record multiple vocal or guitar solos on the same track, and later compare them and select the best V-take.

V-take currently selected for each track 1 - 8

V-takes

1

2

3

4

5

6

7

8

9

10

Track 1 2 3 4 5 6 7 8

Switching V-takes

Here’s how to switch the V-take used by each track 1 - 8.

1. From the main screen, press the [TRACKPARAMETER] key in the track parameter section.

The key lights up and you can select various track

parameters.

2. Use the cursor up/down keys to bring the indication “TR xx-yy” onto the display (where xx is the track number and yy the V-take number).

The V-take name is shown under the track number/V-take

number.

Track number V-take number

TR 1- 1GTR 1- 1

V-take name

HINT

If you select a V-take on which nothing is recorded, the

ZOOM MRS-802

indication “NO DATA” is shown instead of the V-take name.

In the level meter display area, a lit dot indicates a recorded V-take. If the dot is out, the V-take is unrecorded.

A flashing dot indicates the currently selected V-take for each track. (The dot for the selected V-take will flash at the same frequency regardless of whether it is recorded or not.)

V-take 1 Lit: recorded V-take

2
3
4	Flashing: currently selected V-take
5

6

7

8 Out: unrecorded V-take

9

10

Track

3. Use the cursor left/right keys to select the track.TR 3- 1GTR 3- 1

HINT

You can also select the track with the status keys (1 - 8,

[MASTER]).

4. Turn the dial to select the V-take.5. Repeat steps 3 - 4 as necessary, to select a V-take for each track.6. When you have finished selecting V-takes, press the [EXIT] key.

The [TRACK PARAMETER] key goes out, and the unit returns to the main screen.

Editing V-take names

A V-take that has been recorded will be automatically assigned a default name, according to the following pattern.

• GTRxx-yy

V-take recorded through insert effect CLEAN, DIST, or

33