Zoom MRS-802 Q=16, BarLen, 3. Press the REC [O] key, 4. Use the cursor up/down keys to select the, 2. Turn the dial to select an empty rhythm pattern number

Reference [Rhythm]

9. Turn the dial to select the beat. The setting range is 1 - 8 (1/4 - 8/4). Then press the [EXIT] key.

The rhythm pattern edit menu reappears.

10. To set the length (number of measures) of the rhythm pattern, use the cursor left/right keys to select the indication “EDIT BarLen”, and press the [ENTER] key.

The current length of the pattern is shown as number of

measures.

BarLen

4 Number of measures

11. Turn the dial to select the desired setting, and press the [EXIT] key.

The setting range is 1 - 99.

12. Press the [EXIT] key twice. The display returns to the screen of step 3.

Step input

For step input, you enter each note separately, while the MRS-802 is in the stop condition.

For rhythm pattern step input, you specify the step length (interval to next note or rest) using the quantize value. Then you use the status keys 1 - 8 and the PLAY [R] key to enter notes and rests.

When you press a status key to select a sound and then press the PLAY [R] key, playing information is entered at that point, and the step advances by an interval corresponding to the current quantize value.

NOTE

If you use the status keys for input, the recorded note

intensity (velocity value) will be constant. To change the

velocity value, use the "Velocity" item of the rhythm utility menu (→ p. 97).

If you only press the PLAY [R] key, no playing information is entered, but the step advances by an interval corresponding to the current quantize value.

1. In rhythm pattern mode ([SONG/PATTERN] key out), press the [DRUM] key so that it is lit.

2. Turn the dial to select an empty rhythm pattern number.

3. Press the REC [O] key.

The display changes as follows, and step input becomes possible.

Q=16

001 1 0

Measure Beat

Tick

On the first line of the display, “Q = xx” shows the quantize value (possible values for xx: 4 - 32, Hi). In the bottom right of the display, the current position is shown in measures/ beats/ticks.

4. Use the cursor up/down keys to select thequantize value (length) of the note you want to enter (→ P. 90).

The quantize value that you select here becomes the length of one step during step recording. You can use the cursor up/ down keys at any time to change the quantize setting.

HINT

The quantize value setting is linked to the quantize setting for real-time input. If you change one setting, the other will also change.

[Rhythm pattern step input]

Quantize value: quarter note Quantize value: sixteenth note

ZOOM MRS-802

91