Reference [Phrase Looping]

2. Use the cursor left/right keys to bring up the

indication “UTILITY PHRASE” on the display, and

press the [ENTER] key.

The names and numbers of phrases in the phrase pool appear

on the display.

PHRASE

REST 0

3. Turn the dial to select the number of the phrase you

want to edit.

When you press the PLAY [R] key, the selected phrase is played. If you select a number where no phrase is imported, the indication “EMPTY” appears instead of the phrase name.

4. Press the [EDIT] key.

The phrase edit menu appears.

PHRASE

MEAS X02 15. Use the cursor up/down keys to call up the parameter you want to edit.• MEAS X xx (xx = 01 - 99)

You can set the number of measures in the range from 1 - 99.

• TIMSIG (Beat)

You can set the number of beats per measure in the phrase. The setting range is 1 (1/4) to 8 (8/4).

• START

You can adjust the phrase start point in minutes, seconds, and milliseconds.

• END

You can adjust the phrase end point in minutes, seconds, and milliseconds.

• NAME

You can specify a name for the phrase.

• LVL

You can adjust the phrase playback level in the range of ±24 dB.

6. Use the dial and the cursor left/right keys to adjust the setting value.• Adjusting MEAS/TIMSIG/LVL

Turn the dial to set the numerical value.

• Adjusting START/END

Use the cursor left/right keys to select the unit, and turn the dial to set the numerical value.

• Adjusting NAME

Use the cursor left/right keys to select the character to edit, and turn the dial to select the character.

HINT

You can use the PLAY [R] key to check the phrase both

during and after editing.

7. Repeat steps 5 - 6 to complete the phrase.

If desired, press the [EXIT] key several times to return to the

screen of step 2, and select another phrase parameter.

8. To return to the main screen, press the [EXIT] key

several times.

Copying a phrase

You can copy a phrase to any other phrase number. Any phrase at the copy destination will be overwritten (erased). This is convenient for example to use one phrase as a starting point and save it with different parameter settings.

1. From the main screen, press the [UTILITY] key in the display section.

The utility menu appears on the display.

UTILITY

TR EDIT

2. Use the cursor left/right keys to bring up the indication “UTILITY PHRASE” on the display, and press the [ENTER] key.

The display changes as follows.

ZOOM MRS-802

62