Zoom MRS-802 TR1, TR1, TR1, PAN, PAN, INPUT, INPUT, CHO SEND, REV SEND, CHO SEND, [EXIT] key, Adjusting the pan/balance, • To adjust the reverb send level

Reference [Mixer]

HINT

To record the signal processed by the send/return effect on

a track, you can use bounce recording while the respective [INPUT 1]/[INPUT 2] key is on (→ p. 39).

1. Press the [CHORUS/DELAY] key or [REVERB] keyto select a patch for the send/return effect.

The display changes and shows the currently selected patch

of the selected effect (chorus/delay or reverb).

2. Turn the dial to select the patch you want to use.

You can also select a patch by using the PATCH SELECT

[Q]/[W] keys in the effect section.

When you have selected the patch, press the [EXIT] key to

return to the main screen.

3. Press the [TRACK PARAMETER] key in the track parameter section and use the cursor up/down keys to bring the following indication onto the display.

• To adjust the chorus/delay send level

TR1

CHO SEND 0

Parameter

Setting value

• To adjust the reverb send level

TR1

REV SEND 0

Parameter

Setting value

4. Press the [INPUT 1] or [INPUT 2] key in the input section.

The input mixer (INPUT) is selected as target for setting the

send level.

INPUT

CHO SEND 0

5. Turn the dial to select the effect depth.

Higher values result in more effect depth (stronger effect).

The range and default values for the parameters are shown

below.

•CHORUS/DELAY SEND: 0 - 100 (default: 0)•REVERB SEND: 0 - 100 (default: 0)

HINT

When the send level is shown on the display, pressing the [ENTER] key will turn the signal output to the send return effect off. Pressing the key once more will turn the signal on again.

6. When you have ﬁnished making settings, press the

[EXIT] key.

The unit returns to the main screen.

Adjusting the pan/balance

This section explains how to adjust the pan (stereo position) of the signal sent from the input mixer to the MASTER OUTPUT jacks and the recording tracks, or the balance (the volume balance between two channels).

1. Press the [TRACK PARAMETER] key in the track parameter section and use the cursor up/down keys to bring the following indication onto the display.

TR1

PAN 02. Press the [INPUT 1] or [INPUT 2] key in the input section.

The input mixer (INPUT) is selected as target for panning

adjustment.

INPUT

PAN 0

3. Turn the dial to edit the value of the PAN parameter.

The PAN parameter can be adjusted in a range of L100 (far

left) - 0 (center) - R100 (far right).

ZOOM MRS-802