Reference [Effects]

9. If you want to adjust the patch level (the final volume of the patch), use the cursor up/down keys to bring up the indication “TOTAL PAT LVL”, and turn the dial.

The patch level can be adjusted in a range of 1 - 30.

TOTAL

PAT LVL 23

10. When you have finished editing, press the [EXIT]

key.

The unit returns to the patch select screen.

NOTE

Keep in mind that if you return to the patch select screen and select another patch without first storing the patch, the edited contents will be lost. If you want to keep the results of your editing session, refer to the following section.

Storing an insert effect patch

A patch that you have edited can be stored in any location of the same algorithm. You can also store an existing patch in another location to create a copy of that patch.

1. Press the [INSERT EFFECT] keys in the display

section, and then press the [EDIT] key.

The currently selected patch can now be edited. Perform any

editing steps that you wish to make.

2. When editing is complete, press the [STORE] key in

the control section.

A screen for specifying the store target location appears on

the display.

The patch will be stored, and the unit returns to the patch

select screen.

HINT

•Patches that you have stored are saved on the hard disk as part of the project.

•Patch data included in an already existing project can be loaded into the current project (→ p. 110).

Editing the name of an insert effect patch

This section explains how to edit the name of the currently

selected patch.

1. Press the [INSERT EFFECT] keys which includes the target patch. Then use the PATCH SELECT [Q]/[W] keys or the dial to select the patch that you want to edit.

2. Press the [EDIT] key.

The currently selected patch can now be edited.

3. Use the cursor left/right keys to bring up the indication “TOTAL PAT LVL”.

TOTAL

PAT LVL 24

4. Repeatedly press the cursor down key to bring up the indication “PAT NAME”.

The name of the selected patch can now be edited. The

character currently selected for editing flashes.

STORE

MRS-Drv 1

Patch number

3. Turn the dial to select the store destination patch number.4. To store the patch, press the [STORE] key once more.

ZOOM MRS-802

PAT NAME

MRS-Drv

5. Use the cursor left/right keys to move the flashing position to the character you want to change, and turn the dial to select a character.

For information on available characters, refer to page 34.

6. Repeat step 5 as necessary to complete the newname.

105