Zoom MRS-802 [R] key, FF [Y] key, REW [T] key, STOP [P] key, PLAY [R] key, several times, track to be played, (3) Finalize status, • A (Analog playback)

Reference [Creating a CD]

(3) Finalize status	STOP [P] key
When a “*” symbol is shown here, a non-finalized CD-R/	Playback stops, and the system returns to the beginning of
RW disc has been inserted.	the current track.
(4) Current position in track	FF [Y] key
The location in the current track is shown here in hours (H),	Playback stops, and the system jumps to the beginning of
minutes (M), and seconds (S).	the next track.
5. Use the FF [Y] and REW [T] keys to select the	REW [T] key
track to be played.	Playback stops, and the system jumps to the beginning of
While the track number is shown, the FF [Y] and REW	the current track.
[T] keys can be used to select the track on the CD. The FF	9. To return to the main screen, press the [EXIT] key
[Y] key selects the next track and the REW [T] key selects
the previous track.	several times.
6. Use the cursor up/down keys to select the
playback method for the audio CD.
Each push of the cursor up/down keys toggles between the
following two methods.
• D (Digital playback)
The digital audio signal of the CD is read by the MRS-802
in the digital domain and becomes available as an audio
signal at the rear panel MASTER OUTPUT jacks, and front
panel MASTER PHONES jack. (Default setting)
• A (Analog playback)
The audio signal of the CD is reproduced via the headphone
output of the CD-R/RW drive.
7. To start playback of the audio CD, press the PLAY
[R] key.
Playback of the selected track starts. When the track is
finished, playback continues with the next track. During
audio CD playback, all faders except for the [MASTER]
fader as well as the EQ, reverb, chorus/delay, and pan
settings are disabled.
8. For track selection and for controlling playback
stop/pause, use the transport section keys.
PLAY [R] key
Playback of the selected track starts. Pressing the key during
playback sets the system to pause mode.

ZOOM MRS-802

116