Reference [Projects]

HINT

It is also possible to erase the currently loaded project. In this case, the lowest-numbered project will automatically be loaded after the erase operation has been completed.

Editing the project name

This lets you edit the name of the currently loaded project.

1. Refer to steps 1 - 2 of “Basic procedure” to bring up the indication “PROJECT NAME” on the display. Then press the [ENTER] key.

The current project name is shown on the display.

PRJ NAME

PRJ010

2. To edit the name, use the cursor left/right keys to move the flashing position to the character you want to change, and turn the dial to select a character.

For information on available characters, refer to page 34. To return to the main screen after editing the name, press the [EXIT] key.

Protecting/unprotecting a project

This operation lets you write-protect the currently loaded project or turn previously enabled protection off. When protect is ON, the following operations will be impossible.

•Deleting a project

•Editing or recording on the recorder

•Changing the V-take

•Editing a patch (including module on/off)

•Recording or editing a rhythm pattern or rhythm song

•Saving scenes, making marker settings, etc.

1. Refer to steps 1 - 2 of “Basic procedure” to bring up the indication “PROJECT PROTECT” on the display. Then press the [ENTER] key.

The screen for setting the protect status to ON/OFF is shown

on the display.

ZOOM MRS-802

PRJ PRT

OFF

2. Turn the dial to select ON (write-protect enabled)or OFF (write-protect disabled).

When write-protect is ON for a project, a lock symbol is shown to the right of the project number.

PRJ 008

PRJ008

Lock symbol

A change in the protect status becomes active immediately. To return to the main screen, press the [EXIT] key several times.

NOTE

If a project is loaded for which write-protect is not enabled, and you select another project, the current project’s mix settings will be overwritten, because the existing project is automatically saved on the hard disk before loading the new project. If you do not want a completed mix to be changed further, it is recommended to set write-protect to ON.

HINT

The various track parameters such as EQ and panning can be adjusted also when the project is protected (but the settings will not be stored).

127