Reference [Other Functions]

5. When the command has been executed, turn theunit off and then turn it on again.

The MRS-802 will operate in normal mode.

Test/restore integrity of data on internal hard disk (ScanDisk)

This action serves to test the disk and perform restorative action if necessary. Try using this function when operation of the MRS-802 has become unstable.

NOTE

ScanDisk may not be able in all cases to restore damaged files. To guard against data loss, it is recommended to regularly back up data from the hard disk onto CD-R/RW discs.

1. Refer to steps 1 - 3 of “Basic maintenance procedure” to bring up the indication “ScanDisk” on the display. Then press the [ENTER] key.

The ScanDisk menu for selecting the test function appears.

AutoRepr <-ENT->2. Use the cursor left/right keys to select the ScanDisk function.• AutoRepr (Auto Repair)

This function tests all files on the hard disk and automatically repairs damaged files.

• ChekFile (Check File)

This function only tests all files, but does not automatically repair them. If a problem is found, a message is displayed on the screen.

3. To execute the selected function, press the

[ENTER] key.

The ScanDisk operation starts.

Once ScanDisk has started, it cannot be interrupted by the user. Never turn power to the unit off while ScanDisk is running. Otherwise the hard disk may be destroyed.

4. When ScanDisk is completed, press the [EXIT] key.

The unit returns to the condition of step 1.

Rewriting system file data (Factory Initialize)

This action restores only the system files and other data necessary for operation of the MRS-802. Audio data created by the user are not affected by this operation. Try using this function if operation of the MRS-802 is still unstable even after using the ScanDisk function.

1. Refer to steps 1 - 3 of “Basic maintenance procedure” to bring up the indication “Init Fac” on the display. Then press the [ENTER] key.

The indication “Init Fac SURE?” appears on the display to

confirm the operation.

Init FacSure?2. To carry out the initialization process, press the

[ENTER] key once more.

The factory initialize process starts. When it is complete, the unit returns to the condition of step 1.

Formatting the hard disk (All Initialize)

This action formats the hard disk of the MRS-802 and then restores the system files and other data necessary for operation of the MRS-802. All existing projects on the hard disk including the demo songs will be erased.

NOTE

Once erased, projects cannot be restored. Use this function with extreme care. If you want to preserve projects, back them up to CD-R/RW disc first (→ p. 119).

1. Refer to steps 1 - 3 of “Basic maintenance procedure” to bring up the indication “Init ALL” on the display. Then press the [ENTER] key.

The indication “Init ALL SURE?” appears on the display to

confirm the operation.

ZOOM MRS-802

138