Figure 44 Bandwidth Control
The following table describes the related labels in this screen.
Table 24 Bandwidth Control
LABEL | DESCRIPTION |
|
|
Active | Select this check box to enable bandwidth control on the switch. |
|
|
Port | This field displays the port number. |
|
|
Active | Make sure to select this check box to activate bandwidth control on a port. |
|
|
Commited | Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for the |
Rate | incoming traffic flow on a port. The commit rate should be less than the peak rate. The |
| sum of commit rates cannot be greater than or equal to the uplink bandwidth. |
Peak Rate | Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming |
| traffic flow on a port. |
Egress Rate | Specify the maximum bandwidth allowed in megabits per second (Mbps) for the out- |
| going traffic flow on a port. Enter a number between 1 and 1000. |
Apply | Click Apply to save the settings. |
|
|
Cancel | Click Cancel to reset the fields to your previous configuration. |
|
|
105 | Chapter 12 Bandwidth Control |