GS-4012F/4024 User’s Guide

Figure 190 qos priority Command Example

ras(config)# interface port-channel 1,3-5 ras(config-interface)# qos priority 4

41.8.14 name

Syntax:

name <port-name-string>

where

<port-name-string>Sets a name for your port interface(s).

An example is shown next.

•Enable ports one, three, four and five for configuration.

•Set a name for the ports.

Figure 191 name Command Example

ras(config)# interface port-channel 1,3-5 ras(config-interface)# name Test

41.8.15 speed-duplex

Syntax:

speed-duplex <auto10-half10-full100-half100-full1000-full>

where

<auto10-half10- full100-half100- full1000-full>

Sets the duplex mode (half or full) and speed (10, 100 or 1000 Mbps) of the connection on the port. Selecting auto (auto-negotiation) makes one port able to negotiate with a peer automatically to obtain the connection speed and duplex mode that both ends support.

An example is shown next.

•Enable ports one, three, four and five for configuration.

•Set the speed to 10 Mbps in half duplex mode.

Figure 192 speed-duplex Command Example

ras(config)# interface port-channel 1,3-5 ras(config-interface)# speed-duplex 10-half

Chapter 41 Command Examples

286