ZyXEL Communications GS-4012F/4024 manual 263

GS-4012F/4024 User’s Guide

Table 96 interface port-channel Commands		(continued)
COMMAND				DESCRIPTION
			broadcast-limit	Disables broadcast storm
				control limit on the port(s).
			diffserv	Disables DiffServ on the port(s).
			dlf-limit	Disables destination lookup
				failure (DLF) on the switch.
			egress-set <port-	Disables the egress port setting.
			list>
			flow-control	Disables flow control on the
				port(s).
			gvrp	Disable GVRP on the port(s).
			igmp-filtering	Disables IGMP filtering.
			profile
			igmp-group-limit	Disables IGMP group limitation.
			igmp-immediate-	Disables the IGMP immidiate
			leave	leave function.
			inactive	Enables the port(s) on the
				switch.
			ingress-check	Disables ingress checking on
				the port(s).
			intrusion-lock	Disables intrusion-lock on a port
				so that a port can be connected
				again after you disconnected
				the cable.
			mirror	Disables port mirroring on the
				port(s).
			multicast-limit	Disables multicast limit on the
				port(s).
			vlan-trunking	Disables VLAN trunking on the
				port(s).
	pvid <1-4094>			The default PVID is VLAN 1 for
				all ports. Sets a PVID in the
				range 1 to 4094 for the specified
				interface.
	qos		priority <0 .. 7>	Sets the quality of service
				priority for an interface.
	speed-duplex		<auto10-half10-	Sets the duplex mode (half or
			full100-half100-	full) and speed (10, 100 or
			full1000-full>	1000 Mbps) of the connection
				on the interface. Selecting
				auto (auto-negotiation) makes
				one port able to negotiate with a
				peer automatically to obtain the
				connection speed and duplex
				mode that both ends support.
	spq			Sets the port(s) to use Strict
				Priority Queuing.
	test			Performs an interface loopback
				test.

263 Chapter 40 Introducing the Commands