Table 34 | Classifier (continued) | |
|
|
|
LABEL |
| DESCRIPTION |
|
|
|
Cancel |
| Click Cancel to reset the fields back to your previous configuration. |
|
|
|
Clear |
| Click Clear to set the above fields back to the factory defaults. |
|
|
|
18.3 Viewing and Editing Classifier Configuration
To view a summary of the classifier configuration, scroll down to the summary table at the bottom of the Classifier screen. To change the settings of a rule, click a number in the Index field. When two rules conflict with each other, a higher layer rule has priority over lower layer rule.
Figure 55 Classifier: Summary Table
The following table describes the labels in this screen.
Table 35 Classifier: Summary Table
LABEL | DESCRIPTION |
|
|
Index | This field displays the index number of the rule. Click an index number to edit the rule. |
|
|
Active | This field displays Yes when the rule is activated and No when is it deactivated. |
|
|
Name | This field displays the descriptive name for this rule. This is for identification purpose only. |
|
|
Rule | This field displays a summary of the classifier rule’s settings. |
|
|
Delete | Click Delete to remove the selected entry from the summary table. |
|
|
Cancel | Click Cancel to clear the Delete check boxes. |
|
|
The following table shows some other common Ethernet types and the corresponding protocol number.
Table 36 Common Ethernet Types and Protocol Number
ETHERNET TYPE | PROTOCOL NUMBER |
IP ETHII | 0800 |
|
|
X.75 Internet | 0801 |
|
|
NBS Internet | 0802 |
|
|
ECMA Internet | 0803 |
|
|
Chaosnet | 0804 |
|
|
X.25 Level 3 | 0805 |
|
|
125 | Chapter 18 Classifier |