GS-4012F/4024 User’s Guide

Table 93 Command Summary: User Mode (continued)

COMMAND

DESCRIPTION

 

 

 

traceroute

<iphost-name>

Determines the path a packet takes to a device.

 

[in-bandout-of-bandvlan

 

 

<vlan-id>]

 

 

[ttl <1-255>]

 

 

[wait <1-60>]

 

 

[queries <1-10>]

 

 

help

Displays help information for this command.

40.9.2 Enable Mode

The following table describes the commands available for Enable mode.

Table 94 Command Summary: Enable Mode

COMMAND

 

 

DESCRIPTION

 

 

 

 

baudrate

 

 

Sets the console port baud rate.

<12345

 

 

1:38400

>

 

 

2:19200

 

 

 

3:9600

 

 

 

4:57600

 

 

 

5:115200

 

 

 

 

boot

config <index>

 

Restarts the system with the specified

 

 

 

configuration file.

configure

 

 

Accesses Configuration mode. See

 

 

 

Section 40.9.3 on page 247.

copy

running-config tftp

 

Backs up running configuration to the

 

<ip> <remote-file>

 

specified TFTP server with the specified

 

 

 

file name.

 

tftp

config <ip>

Restores configuration with the specified

 

 

<remote-file>

filename from the specified TFTP server.

 

 

flash <ip>

Restores firmware via TFTP.

 

 

<remote-file>

 

disable

 

 

Exits Enable (or privileged) mode.

enable

 

 

Accesses Enable (or privileged) mode.

erase

running-config

 

Resets to the factory default settings.

exit

 

 

Exits Enable (or privileged) mode.

help

 

 

Displays help information.

history

 

 

Displays a list of command(s) that you

 

 

 

have previously executed.

igmp-flush

 

 

Removes all IGMP information.

kick

<tcp session>

 

Disconnects the specified TCP session.

logout

 

 

Exits Enable (or privileged) mode.

mac-flush

 

 

Clears the MAC address table.

243

Chapter 40 Introducing the Commands