ZyXEL Communications GS-4012F/4024 admin, admin, Logins, Access Control

GS-4012F/4024 User’s Guide

•An administrator is someone who can both view and configure switch changes. The username for the Administrator is always admin. The default administrator password is 1234.

Note: It is highly recommended that you change the default administrator password (1234).

•A non-administrator (username is something other than admin) is someone who can view but not configure switch settings.

Click Access Control from the navigation panel and then click Logins from this screen.

Figure 128 Access Control: Logins

The following table describes the labels in this screen.

Table 81 Access Control: Logins

LABEL DESCRIPTION

Administrator

This is the default administrator account with the “admin” user name. You cannot change the default administrator user name. Only the administrator has read/write access.

Old Password	Type the existing system password (1234 is the default password when
	shipped).
New Password	Enter your new system password.
Retype to confirm	Retype your new system password for confirmation

Edit Logins

You may configure passwords for up to four users. These people have read-only access.

User Name	Set a user name (up to 30 characters long).
Password	Enter your new system password.
Retype to confirm	Retype your new system password for confirmation
Apply	Click Apply to save your changes back to the switch.
Cancel	Click Cancel to begin configuring this screen afresh.

Chapter 33 Access Control 210