35.2 Cluster Management Status
Click Management, Cluster Management in the navigation panel to display the following screen.
Note: A cluster can only have one manager.
Figure 141 Cluster Management: Status
The following table describes the labels in this screen.
Table 86 Cluster Management: Status
LABEL | DESCRIPTION |
|
|
Status | This field displays the role of this switch within the cluster. |
| Manager |
| Member (you see this if you access this screen in the cluster member switch directly |
| and not via the cluster manager) |
| None (neither a manager nor a member of a cluster) |
|
|
Manager | This field displays the cluster manager switch’s hardware MAC address. |
|
|
The Number of | This field displays the number of switches that make up this cluster. The following |
Member | fields describe the cluster member switches. |
Index | You can manage cluster member switches via the cluster manager switch. Each |
| number in the Index column is a hyperlink leading to the cluster member switch’s web |
| configurator (see Figure 142 on page 224). |
HwAddr | This is the cluster member switch’s hardware MAC address. |
|
|
Name | This is the cluster member switch’s System Name. |
|
|
Model | This field displays the model name. |
|
|
Status | This field displays: |
| Online (the cluster member switch is accessible) |
| Error (for example the cluster member switch password was changed or the switch |
| was set as the manager and so left the member list, etc.) |
| Offline (the switch is disconnected - Offline shows approximately 1.5 minutes after |
| the link between cluster member and manager goes down) |
223 | Chapter 35 Cluster Management |