GS-4012F/4024 User’s Guide

40.9.4 interface port-channel Commands

The following table lists the interface port-channelcommands in configuration mode. Use these commands to configure the ports.

Table 96 interface port-channel Commands

COMMAND

DESCRIPTION

 

 

 

 

interface

 

 

Enables a port or a list of ports

port-channel

 

 

for configuration.

<port-list>

 

 

 

 

bandwidth-limit

 

Enables bandwidth control on

 

 

 

the port(s).

 

 

cir <Kbps>

Sets the guaranteed bandwidth

 

 

 

allowed for incoming traffic on

 

 

 

the port(s).

 

 

egress <Kbps>

Sets the maximum bandwidth

 

 

 

allowed for outgoing traffic on

 

 

 

the port(s).

 

 

ingress <Kbps>

Sets the maximum bandwidth

 

 

 

allowed for incoming traffic on

 

 

 

the port(s).

 

 

pir <Kbps>

Sets the maximum bandwidth

 

 

 

allowed for incoming traffic on

 

 

 

the port(s).

 

bpdu-control

 

Sets how Bridge Protocol Data

 

<peertunneldiscard

 

Units (BPDUs) are used in STP

 

network>

 

port states.

 

 

 

 

broadcast-limit

 

Enables broadcast storm

 

 

 

control limit on the switch.

 

diffserv

 

Enables DiffServ on the port(s).

 

 

<pkt/s>

Sets how many broadcast

 

 

 

packets the interface receives

 

 

 

per second.

 

dlf-limit

 

Enables the Destination Lookup

 

 

 

Failure (DLF) limit.

 

 

<pkt/s>

Sets the interface DLF limit in

 

 

 

packets per second (pps).

 

egress set <port-

 

Sets the outgoing traffic port list

 

list>

 

for a port-based VLAN.

 

exit

 

Exits from the interface port-

 

 

 

channel command mode.

 

flow-control

 

Enables interface flow control.

 

 

 

Flow control regulates

 

 

 

transmissions to match the

 

 

 

bandwidth of the receiving port.

 

frame-type

 

Choose to accept both tagged

 

<alltagged>

 

and untagged incoming frames

 

 

 

or just tagged incoming frames

 

 

 

on a port.

261

Chapter 40 Introducing the Commands