GS-4012F/4024 User’s Guide

Table 38 Policy (continued)

LABEL

DESCRIPTION

 

 

DiffServ

Select No change to keep the TOS and/or DSCP fields in the packets.

 

Select Set the packet’s TOS field to set the TOS field with the value you configure in

 

the TOS field.

 

Select Replace the IP TOS with the 802.1 priority value to replace the TOS field

 

with the value you configure in the Priority field.

 

Select Set the Diffserv Codepoint field in the frame to set the DSCP field with the

 

value you configure in the DSCP field.

Outgoing

Select Send the packet to the mirror port to sent the packet to the mirror port.

 

Select Send the packet to the egress port to send the packet to the egress port.

 

Select Send the matching frames (broadcast or DLF, multicast, marked for

 

dropping or to be sent to the CPU) to the egress port to send the broadcast,

 

multicast, DLF, marked-to-drop or CPU frames to the egress port.

 

Select Set the packet’s VLANID to set the VLAN ID of the packet with the value you

 

configure in the VLANID field.

Metering

Select Enable to activate bandwidth limitation on the traffic flow(s) then set the actions

 

to be taken on out-of-profile packets.

Out-of-profile

Select the action(s) to be performed for out-of-profile traffic.

Action

Select Drop the packet to discard the out-of-profile traffic.

 

 

Select Change the DSCP Value to replace the DSCP field with the value specified in

 

the Out-of-Profile DSCP field above.

 

Select Do not drop the matching frame previously marked for dropping to queue

 

the frames that are marked to be dropped.

Add

Click Add to inset the entry to the summary table below.

 

 

Cancel

Click Cancel to reset the fields back to your previous configuration.

 

 

Clear

Click Clear to set the above fields back to the factory defaults.

 

 

19.3 Viewing and Editing Policy Configuration

To view a summary of the classifier configuration, scroll down to the summary table at the bottom of the Policy screen. To change the settings of a rule, click a number in the Index field.

Figure 58 Policy: Summary Table

The following table describes the labels in this screen.

Table 39 Policy: Summary Table

LABEL

DESCRIPTION

 

 

Index

This field displays the policy index number. Click an index number to edit the policy.

 

 

Active

This field displays Yes when policy is activated and No when is it deactivated.

 

 

131

Chapter 19 Policy Rule