GS-4012F/4024 User’s Guide

41.4 traceroute

Syntax:

traceroute <ip> [in-bandout-of-bandvlan <vlan-id>][ttl <1- 255>] [wait <1-60>] [queries <1-10>]

where

<ip>

= The IP address of an Ethernet device.

[in-bandout-of- = bandvlan <vlan- id> ]

Specifies the network interface or the VLAN ID to which the Ethernet device belongs.

[ttl <1-255>]

=

Specifies the Time To Live (TTL) period.

[wait <1-60>]

=

Specifies the time period to wait.

[quesries <1-10>]

=

Specifies how many tries the switch performs the traceroute

 

 

function.

This command displays information about the route to an Ethernet device. The following example displays route information to an Ethernet device with an IP address of 192.168.1.100.

Figure 166 traceroute Command Example

ras> traceroute 192.168.1.100

traceroute to 192.168.1.100, 30 hops max, 40 byte packet 1:192.168.1.100 (10 ms) (10 ms) (0 ms)

traceroute done:

41.5 Enabling RSTP

To enable RSTP on a port. Enter spanning-treefollowed by the port number and press

[ENTER].

The following example enables RSTP on port 10.

273

Chapter 41 Command Examples