ZyXEL Communications GS-4012F/4024 manual 262

				GS-4012F/4024 User’s Guide
Table 96 interface port-channel Commands		(continued)
COMMAND				DESCRIPTION
	gvrp			Enables this function to permit
				VLAN groups beyond the local
				switch.
	help			Displays a description of the
				interface port-channel
				commands.
	igmp-filtering		profile <profile>	Applies the specified IGMP
				filtering profile.
	igmp-group-limit			Enables the IGMP group
				limiting feature.
			number <number>	Sets the maximum number
				IGMP groups allowed.
	igmp-immediate-leave			Enables the IGMP immidiate
				leave function.
	igmp-querier-mode			Sets the IGMP query mode for
	<autofixededge>			the port.
	inactive			Disables the specified port(s) on
				the switch.
	ingress-check			Enables the device to discard
				incoming frames for VLANs that
				are not included in a port
				member set.
	intrusion-lock			Enables intrusion lock on the
				port(s) and a port cannot be
				connected again after you
				disconnected the cable.
	ipmc egress-untag-			Enables the port(s) to remove
	vlan <1-4094>			specified VLAN tag from IP
				multicasting packets before
				forwarding.
	mirror			Enables port mirroring in the
				interface.
			dir <ingress	Enables port mirroring for
			egressboth>	incoming, outgoing or both
				incoming and outgoing traffic.
				Port mirroring copies traffic from
				one or all ports to another or all
				ports for external analysis.
	multicast-limit			Enables the port(s) multicast
				limit.
			<pkt/s>	Sets how many multicast
				packets the port(s) receives per
				second.
	name <port-name-			Sets a name for the port(s).
	string>			Enter a descriptive name (up to
				nine printable ASCII
				characters).
	no		bandwidth-limit	Disables bandwidth limit on the
				port(s).

Chapter 40 Introducing the Commands 262