ZyXEL Communications GS-4012F/4024 manual 258

			GS-4012F/4024 User’s Guide
Table 95 Command Summary: Configuration Mode (continued)
COMMAND			DESCRIPTION
		no area <area-id>	Resets the authentication
		virtual-link	settings on this virtual area.
		<router-id>
		authentication-
		same-as-area
		no area <area-id>	Deletes the virtual link from the
		virtual-link	area.
		<router-id>
		no network <ip-	Deletes the OSPF network.
		addr/bits>
		no redistribute	Sets the switch not to learn RIP
		rip	routing information.
		no redistribute	Sets the switch not to learn
		static	static routing information.
		redistribute rip	Sets the switch to learn RIP
		metric-type <12>	routing information which will
		metric <0-65535>	use the specified metric
			information.
		redistribute	Sets the switch to learn static
		static metric-	routing information which will
		type <12> metric	use the specified metric
		<0-65535>	information.
	rip		Enables and enters the RIP
			configuration mode.
		exit	Leaves the RIP configuration
			mode.
	vrrp network <ip-		Adds aa new VRRP network nd
	address>/<mask-bits>		enters the VRRP configuration
	vr-id <1-7> uplink-		mode.
	gateway <ip>
		exit	Exits from the VRRP command
			mode.
		inactive	Disables the VRRP settings.
		interval <1..255>	Sets the time interval (in
			seconds) between Hello
			message transmissions.
		name <name	Sets a descriptive name of the
		string>	VRRP setting for identification
			purposes.
		no inactive	Activates this VRRP.
		no preempt	Disables VRRP preemption
			mode.
		no primary-	Resets the network to use the
		virtual-ip	default primary virtual gateway
			(interface IP address).
		no secondary-	Sets the network to use the
		virtual-ip	default secondary virtual
			gateway (0.0.0.0).

Chapter 40 Introducing the Commands 258