GS-4012F/4024 User’s Guide

where

 

 

Enables broadcast storm control limit on the switch.

<pkt/s>

Sets how many broadcast packets the interface receives per second.

An example is shown next.

•Enable port one for configuration.

•Enable broadcast control.

•Set the number of broadband packets the interface receives per second.

Figure 181 broadcast-limit Command Example

ras(config)# interface port-channel 1 ras(config-interface)# broadcast-limit ras(config-interface)# broadcast-limit 21

41.8.5 bandwidth-limit

Syntax:

bandwidth-limit bandwidth-limit egress <Mbps> bandwidth-limit ingress <Mbps>

where

 

 

 

<Mbps>

Enables bandwidth control on the switch.

 

) or

Sets the maximum bandwidth allowed for outgoing traffic (

egress

 

incoming traffic (ingress) on the switch.

 

 

 

 

An example is shown next.

•Enable port one for configuration.

•Enable bandwidth control.

•Set the outgoing traffic bandwidth limit to 7Mbps.

•Set the incoming traffic bandwidth limit to 9Mbps.

Figure 182 bandwidth-limit Command Example

ras(config)# interface port-channel 1 ras(config-interface)# bandwidth-limit ras(config-interface)# bandwidth-limit egress 7 ras(config-interface)# bandwidth-limit ingress 9

281

Chapter 41 Command Examples