Figure 194 CPU VLAN Configuration and Activation Example
ras (config)# vlan 3
ras
42.4 Global VLAN1Q Tagged VLAN Configuration Commands
This section shows you how to configure and monitor the IEEE 802.1Q Tagged VLAN.
42.4.1 GARP Status
Syntax:
show garp
This command shows the switch’s GARP timer settings, including the join, leave and leave all timers.
An example is shown next.
Figure 195 GARP STATUS Command Example
ras # show garp GARP Timer
Join Timer = 200
Leave Timer = 600 Leave All Timer = 10000 ras#
42.4.2 GARP Timer
Syntax:
garp join <msec> leave <msec> leaveall <msec>
where
join <msec> = This sets the duration of the Join Period timer for GVRP in milliseconds. Each port has a Join Period timer. The allowed Join Time range is between 100 and 32767 milliseconds; the default is 200 milliseconds.
Chapter 42 IEEE 802.1Q Tagged VLAN Commands | 290 |