GS-4012F/4024 User’s Guide

2In the Static VLAN screen, select ACTIVE, enter a descriptive name in the Name field and enter 2 in the VLAN Group ID field for the Sales network.

Note: The VLAN Group ID field in this screen and the VID field in the IP Setup screen refer to the same VLAN ID.

3Since the Sales network is connected to port 10 on the switch, select Fixed to configure port 10 to be a permanent member of the VLAN only.

4To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames

properly, clear the TX Tagging check box to set the switch to remove VLAN tags before sending.

5Click Add to save the settings.

5.1.4Setting Port VID

Use PVID to add a tag to incoming untagged frames received on that port so that the frames are forwarded to the VLAN group that the tag defines.

In the example network, configure 2 as the port VID on port 10 so that any untagged frames received on that port get sent to VLAN 2.

Figure 25 Initial Setup Network Example: Port VID

63

Chapter 5 Initial Setup Example