ZyXEL Communications GS-4012F/4024 manual 257

GS-4012F/4024 User’s Guide

Table 95 Command Summary: Configuration Mode (continued)

COMMAND		DESCRIPTION
	area <area-id>	Enables simple authentication
	virtual-link	and sets the authentication key
	<router-id>	for the specified virtual link in
		the area.
	authentication-
	key <key>
	area <area-id>	Sets the virtual link to use the
	virtual-link	same authentication method as
	<router-id>	the area.
	authentication-
	same-as-area
	area <area-id>	Enables MD5 authentication
	virtual-link	and sets the key ID and key for
	<router-id>	the virtual link in the area.
	message-digest-
	key <keyid> md5
	<key>
	area <area-id>	Sets a descriptive name for the
	virtual-link	virtual link for identification
	<router-id> name	purposes.
	<name>
	exit	Leaves the router OSPF
		configuration mode.
	network <ip-addr/	Creates an OSPF area.
	bits> area <area-
	id>
	no area <area-id>	Removes the specified area.
	no area <area-id>	Sets the area to use no
	authentication	authentication (None).
	no area <area-id>	Sets the area to use the default
	default-cost	cost (15).
	no area <area-id>	Disables stub network settings
	stub	in the area.
	no area <area-id>	Sets the area to send LSAs
	stub no-summary	(Link State Advertisements).
	no area <area-id>	Resets the authentication
	virtual-link	settings on this virtual link.
	<router-id>
	authentication-
	key
	no area <area-id>	Resets the authentication
	virtual-link	settings on this virtual link.
	<router-id>
	message-digest-
	key

257 Chapter 40 Introducing the Commands