GS-4012F/4024 User’s Guide

•Enable the IEEE 802.1Q tagged VLAN command to configure tagged VLAN for the switch.

•Enable ports one, three, four and five for configuration.

•Enable GVRP on the interface.

Figure 184 gvrp Command Example

ras(config)# vlan1q gvrp

ras(config)# interface port-channel 1,3-5 ras(config-interface)# gvrp

41.8.8 ingress-check

Syntax:

ingress-check

Enables the device to discard incoming frames for VLANs that are not included in a port member set.

An example is shown next.

•Enable ports one, three, four and five for configuration.

•Enable ingress checking on the interface.

Figure 185 ingress-check Command Example

ras(config)# interface port-channel 1,3-5 ras(config-interface)# ingress-check

41.8.9 frame-type

Syntax:

frame-type <alltagged>

where

<alltagged> Choose to accept both tagged and untagged incoming frames or just tagged incoming frames on a port.

An example is shown next.

•Enable ports one, three, four and five for configuration.

•Enable ingress checking on the ports.

•Enable tagged frame-types on the interface.

283

Chapter 41 Command Examples