GS-4012F/4024 User’s Guide

Figure 176 no port-access-authenticator Command Example

ras(config)# no port-access-authenticator

ras(config)# no port-access-authenticator 1,3-5 reauthenticate ras(config)# no port-access-authenticator 1,6-7

41.7.5 no ssh

Syntax:

no ssh

key <rsa1rsadsa>

no

ssh

known-hosts

<host-ip>

no

ssh

known-hosts

<host-ip> [1024ssh-rsassh-dsa]

where

 

key <rsa1rsadsa>

Disables the secure shell server encryption key. Your switch

 

supports SSH versions 1 and 2 using RSA and DSA

 

authentication.

known-hosts <host-ip>

known-hosts <host-ip> [1024ssh-rsassh-dsa]

An example is shown next.

Remove specific remote hosts from the list of all known hosts.

Remove remote known hosts with a specified public key (1024- bit RSA1, RSA or DSA).

•Disable the secure shell RSA1 encryption key.

•Remove the remote host with IP address 172.165.1.8 from the list of known hosts.

•Remove the remote host with IP address 172.165.1.9 and with an SSH-RSA encryption key from the list of known hosts.

Figure 177 no ssh Command Example

ras(config)# no ssh key rsa1

ras(config)# no ssh known-hosts 172.165.1.8 ras(config)# no ssh known-hosts 172.165.1.9 ssh-rsa

41.8 interface Commands

These are some commonly used commands that belong to the interface group of commands.

Chapter 41 Command Examples

278