GS-4012F/4024 User’s Guide

Note: The write memory command is not available in User mode.

You must save your changes after each CLI session. All unsaved configuration changes are lost once you restart the switch.

40.8.1 Logging Out

In User mode, enter the exit or logout command to log out of the CLI.

40.9 Command Summary

The following sections summarize the commands available in the switch together with a brief description of each command. Commands listed in the tables are in the same order as they are displayed in the CLI. See the related section in the User’s Guide for more background information.

40.9.1 User Mode

The following table describes the commands available for User mode.

Table 93 Command Summary: User Mode

COMMAND

 

DESCRIPTION

 

 

 

enable

 

Accesses Enable (or privileged) mode. See Section 40.9.2

 

 

on page 243.

exit

 

Logs out from the CLI.

help

 

Displays help information.

history

 

Displays a list of previously command(s) that you have

 

 

executed. The switch stores up to 256 commands in

 

 

history.

logout

 

Exits from the CLI.

ping

<IPhost-name>

Sends a Ping request to an Ethernet device.

 

[<in-bandout-of-

 

 

bandvlan <vlan-id>]

 

 

[size <0-1472>]

 

 

[-t]

 

 

help

Displays help information for this command.

show

hardware-monitor <CF>

Displays current hardware monitor information with the

 

 

specified temperature unit (Celsius C or Fahrenheit F).

 

ip

Displays IP related information.

 

system-information

Displays general system information.

ssh

<12> <[user@]dest-ip>

Connects to an SSH server with the specified SSH version.

Chapter 40 Introducing the Commands

242