ZyXEL Communications NWA-3160 Series 120

Chapter 8 MBSSID and SSID

•WIRELESS > Security (one of the security profiles).

•WIRELESS > RADIUS (one of the RADIUS profiles).

•WIRELESS > MAC Filter (the MAC filter list, if activated in the SSID profile).

•WIRELESS > Layer 2 Isolation (the layer 2 isolation list, if activated in the SSID profile).

•Also, use the VLAN screen to set up wireless VLANs based on SSID.

Configure the fields in the above screens to use the settings in an SSID profile.

Select an SSID profile in the WIRELESS > SSID screen and click Edit to display the following screen.

Figure 68 Configuring SSID

The following table describes the labels in this screen.

Table 37 Configuring SSID

LABEL	DESCRIPTION
Profile Name	Enter a name identifying this profile.

SSID	When a wireless client scans for an AP to associate with, this is the name that
	is broadcast and seen in the wireless client utility.

Hide Name (SSID)	Select Disable if you want the ZyXEL Device to broadcast this SSID (a
	wireless client scanning for an AP will find this SSID). Alternatively, select
	Enable to have the ZyXEL Device hide this SSID (a wireless client scanning
	for an AP will not find this SSID).

Security	Select a security profile to use with this SSID profile. See Section 7.9 on page
	104 for more information.

RADIUS	Select a RADIUS profile from the drop-down list box, if you have a RADIUS
	server configured. If you do not need to use RADIUS authentication, ignore
	this field. See Section 7.11 on page 112 for more information.