Chapter 16 VLAN
Figure 108 Management VLAN Configuration Example
Perform the following steps in the switch web configurator:
1Click VLAN under Advanced Application.
2Click Static VLAN.
3Select the ACTIVE check box.
4Type a Name for the VLAN ID.
5Type a VLAN Group ID. This should be the same as the management VLAN ID on the ZyXEL Device.
6Enable Tx Tagging on the port which you want to connect to the ZyXEL Device. Disable Tx Tagging on the port you are using to connect to your computer.
7Under Control, select Fixed to set the port as a member of the VLAN.
Figure 109
8Click Apply. The following screen displays.
Figure 110
9Click VLAN Status to display the following screen.
186 |
| |
ZyXEL |
| |
|
|
|