Chapter 16 VLAN

Figure 111 VLAN-Aware Switch - VLAN Status

Follow the instructions in the Quick Start Guide to set up your ZyXEL Device for configuration. The ZyXEL Device should be connected to the VLAN-aware switch. In the above example, the switch is using port 1 to connect to your computer and port 2 to connect to the ZyXEL Device: Figure 108 on page 186.

1In the ZyXEL Device web configurator click VLAN to open the VLAN setup screen.

2Select the Enable VLAN Tagging check box and type a Management VLAN ID (10 in this example) in the field provided.

3Click Apply.

Figure 112 VLAN Setup

4The ZyXEL Device attempts to connect with a VLAN-aware device. You can now access and mange the ZyXEL Device though the Ethernet switch.

"If you do not connect the ZyXEL Device to a correctly configured VLAN-aware device, you will lock yourself out of the ZyXEL Device. If this happens, you must reset the ZyXEL Device to access it again.

 

187

ZyXEL NWA-3160 Series User’s Guide