Chapter 5 System Screens
Figure 43 SYSTEM > Password.
The following table describes the labels in this screen.
Table 12 Password
LABEL | DESCRIPTIONS |
Enable Admin at Local | Select this check box to have the device authenticate management logins to |
| the device. |
|
|
Use old setting | Select this to have the ZyXEL Device use the local management password |
| already configured on the device (“1234” is the default). |
|
|
Use new setting | Select this if you want to change the local management password. |
|
|
Old Password | Type in your existing system password (“1234” is the default password). |
|
|
New Password | Type your new system password (up to 31 characters). Note that as you type |
| a password, the screen displays an asterisk (*) for each character you type. |
|
|
Retype to Confirm | Retype your new system password for confirmation. |
|
|
Enable Admin on | Select this (and configure the other fields in this section) to have a RADIUS |
RADIUS | server authenticate management logins to the ZyXEL Device. |
|
|
Use old setting | Select this to have a RADIUS server authenticate management logins to the |
| ZyXEL Device using the RADIUS username and password already configured |
| on the device. |
|
|
Use new setting | Select this if you want to change the RADIUS username and password the |
| ZyXEL Device uses to authenticate management logon. |
|
|
User Name | Enter the username for this user account. This name can be up to 31 ASCII |
| characters long, including spaces. |
|
|
Password | Type a password (up to 31 ASCII characters) for this user profile. Note that as |
| you type a password, the screen displays a (*) for each character you type. |
| Spaces are allowed. |
| Note: If you are using PEAP authentication, this password |
| field is limited to 14 ASCII characters in length. |
| 79 |
ZyXEL | |
|
|