Appendix F Text File Based Auto Configuration
If there are any errors while processing the configuration file, the AP generates a message with the line number and reason for the first error (subsequent errors during the processing of an individual configuration file are not recorded). You can use SNMP management software to display the message by using the following MIB.
Table 122 Displaying the Auto Configuration Status
ITEM | OBJECT ID | DESCRIPTION |
pwAutoCfgMessage | 1.3.6.1.4.1.890.1.9.1.9 | Auto configuration status message string |
|
|
|
The commands will be executed line by line just like if you entered them in a console or Telnet CI session. Be careful to ensure the integrity of the whole AP configuration. If there are existing settings in the AP, the newly loaded configuration file will either coexist with the previous settings or replace them.
You can zip each configuration file. You must use the store compression method and a .zip file extension. When zipping a configuration file, you can also add password protection using the same password that you use to log into the AP.
Wcfg Command Configuration File Examples
These example configuration files use the wcfg command to configure security and SSID profiles.
Figure 202 WEP Configuration File Example
!#ZYXEL PROWLAN !#VERSION 11
wcfg security 1 name
wcfg security 1 wep keysize 64 ascii wcfg security 1 wep key1 abcde wcfg security 1 wep key2 bcdef wcfg security 1 wep key3 cdefg wcfg security 1 wep key4 defgh wcfg security 1 wep keyindex 1 wcfg security save
wcfg ssid 1 name
300 |
| |
ZyXEL |
| |
|
|
|