Chapter 20 LAN Setup
Follow the instructions in the following table on how to configure the fields in this menu.
Table 83 Menu 3.2 TCP/IP Setup
FIELD | DESCRIPTION |
IP Address | Press [SPACE BAR] and then [ENTER] to select Dynamic to have the ZyXEL |
Assignment | Device obtain an IP address from a DHCP server. You must know the IP address |
| assigned to the ZyXEL Device (by the DHCP server) to access the ZyXEL Device |
| again. |
| Select Static to give the ZyXEL Device a fixed, unique IP address. Enter a subnet |
| mask appropriate to your network and the gateway IP address if applicable. |
|
|
IP Address | Enter the (LAN) IP address of your ZyXEL Device in dotted decimal notation |
|
|
IP Subnet Mask | Your ZyXEL Device will automatically calculate the subnet mask based on the IP |
| address that you assign. Unless you are implementing subnetting, use the subnet |
| mask computed by the ZyXEL Device. |
|
|
Gateway IP | Type the IP address of the gateway. The gateway is an immediate neighbor of your |
Address | ZyXEL Device that will forward the packet to the destination. On the LAN, the |
| gateway must be a router on the same network segment as your ZyXEL Device. |
|
|
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.
218 |
| |
ZyXEL |
| |
|
|
|