Chapter 23 System Information and Diagnosis
Figure 158 Menu 24.3 System Maintenance: Log and Trace
Menu 24.3 - System Maintenance - Log and Trace
1.View Error Log
Please enter selection:
3Enter 1 from Menu 24.3 – System Maintenance – Log and Trace and press [ENTER] twice to display the error log in the system.
After the ZyXEL Device finishes displaying the error log, you will have the option to clear it. Samples of typical error and information messages are presented in the next figure.
Figure 159 Sample Error and Information Messages
55 Sat Jan | 1 00:00:00 2000 PP05 ERROR Wireless LAN init fail, | ||||||
56 | Sat Jan | 1 | 00:00:01 2000 PP07 | INFO | LAN promiscuous mode | <1> | |
57 | Sat Jan | 1 | 00:00:01 2000 PINI | INFO | Last errorlog repeat | 1 Times | |
58 | Sat Jan | 1 | 00:00:01 2000 PINI | INFO | main: init completed |
| |
59 | Sat Jan | 1 | 00:00:02 2000 PP05 | SNMP TRAP 3: link up |
| ||
60 | Sat Jan | 1 | 00:00:30 2000 PSSV | SNMP TRAP 0: cold start | |||
61 | Sat Jan | 1 | 00:01:38 2000 | PINI | INFO | SMT Session Begin |
|
62 | Sat Jan | 1 | 00:06:44 2000 | PINI | INFO | SMT Session End |
|
63 | Sat Jan | 1 | 00:11:13 2000 | PINI | INFO | SMT Session Begin |
|
Clear Error Log | (y/n): |
|
|
|
| ||
|
|
|
|
|
|
|
|
23.4 Diagnostic
The diagnostic facility allows you to test the different aspects of your ZyXEL Device to determine if it is working properly. Menu 24.4 allows you to choose among various types of diagnostic tests to evaluate your system, as shown in the following figure.
Figure 160 Menu 24.4 System Maintenance: Diagnostic
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1.Ping Host
2.DHCP Release
3.DHCP Renewal
System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A
Follow the procedure next to display this menu:
1From the main menu, type “24” to open Menu 24 – System Maintenance.
2From this menu, type “4” to open Menu 24.4 – System Maintenance – Diagnostic.
| 227 |
ZyXEL | |
|
|