Chapter 3 Status Screens
Table 3 The Status Screen
LABEL | DESCRIPTION |
Model | This field displays the ZyXEL Device’s exact model name. |
|
|
Firmware Version | This field displays the current version of the firmware inside the device. It |
| also shows the date the firmware version was created. You can change the |
| firmware version by uploading new firmware in Maintenance > F/W |
| Upload. |
|
|
System Up Time | This field displays the elapsed time since the ZyXEL Device was turned on. |
|
|
Current Date Time | This field displays the date and time configured on the ZyXEL Device. You |
| can change this in the System > Time Setting screen. |
|
|
WLAN Operating | This field displays the current operating mode of the first wireless module |
Mode | (AP, Bridge / Repeater, AP + Bridge or MBSSID). You can change the |
| operating mode in the Wireless > Wireless screen. |
|
|
Management VLAN | This field displays the management VLAN ID if VLAN is active, or |
| Disabled if it is not active. You can enable or disable VLAN, or change the |
| management VLAN ID, in the VLAN > Wireless VLAN screen. |
|
|
IP | This field displays the current IP address of the ZyXEL Device on the |
| network. |
|
|
LAN MAC | This displays the MAC (Media Access Control) address of the ZyXEL |
| Device on the LAN. Every network device has a unique MAC address |
| which identifies it across the network. |
|
|
WLAN MAC | This displays the MAC address of the wireless module. |
|
|
System Resources |
|
|
|
Flash | This field displays the amount of the ZyXEL Device’s flash memory |
| currently in use. The flash memory is used to store firmware and SSID |
| profiles. |
|
|
Memory | This field displays what percentage of the ZyXEL Device’s volatile memory |
| is currently in use. The higher the memory usage, the more likely the |
| ZyXEL Device is to slow down. Some memory is required just to start the |
| ZyXEL Device and to run the web configurator. |
|
|
CPU | This field displays what percentage of the ZyXEL Device’s processing |
| ability is currently being used. The higher the CPU usage, the more likely |
| the ZyXEL Device is to slow down. |
|
|
WLAN Associations | This field displays the number of wireless clients currently associated with |
| the wireless module. Each wireless module supports up to 128 concurrent |
| associations. |
|
|
Interface Status |
|
|
|
Interface | This column displays each interface of the ZyXEL Device. |
|
|
Status | This field indicates whether or not the ZyXEL Device is using the interface. |
| For each interface, this field displays Up when the ZyXEL Device is using |
| the interface and Down when the ZyXEL Device is not using the interface. |
|
|
Rate | For the LAN port this displays the port speed and duplex setting. |
| For the WLAN interface, it displays the downstream and upstream |
| transmission rate or N/A if the interface is not in use. |
|
|
SSID Status |
|
|
|
SSID | This field displays the SSID(s) currently used by the wireless module. |
|
|
BSSID | This field displays the MAC address of the wireless adaptor. |
|
|
Security | This field displays the type of wireless security used by each SSID. |
|
|
46 |
| |
ZyXEL |
| |
|
|
|